DIY tulle bow

Straight to the point

Bow for a girl

We prepare beautiful bows for girls from organza with decoration with rhinestones. We need to work:

  • tulle of white color. Recommended Width: 15 centimeters;
  • glue "moment" for decorating bows with rhinestones;
  • lighter;
  • elastic for hair for the base of the product;
  • a little rhinestone with a size of 3 mm;
  • comfortable scissors;
  • tweezers;
  • pieces of white satin ribbon, measuring 50 * 50 mm (1 pc.), 20 * 50 mm (1 pc.);
  • a circle cut out of cardboard for gluing a flower;
  • glue gun with a rod;
  • blanks for petals from the net.
  1. We start with the petals. Cut strips of length 7.5 cm from tulle and cut in half. We get squares measuring 75 * 75 mm. They are useful for preparing future petals. We put one small square on the second so that it looks like a square with a rhombus placed on top. We turn the blanks so that in the upper part we get several sharp corners similar to sharp petals. We fold the lower right corner with the upper edge of the workpiece, and close the remaining corner. We should get a blank similar to a bell with sharp petals “looking up”. At the bottom, we fix it with a drop of glue so that the part does not unfold. Glue a toothbrush onto the glue with a toothpick. This is done in one direction on each "petal" in the same way. Similarly, we prepare the remaining details.
  2. We are preparing the basis. We take a prepared piece of cardboard, decorate with a satin strip. A hole is cut through the scissors for cutting the gum through the scissors, we do the same with the square of the white ribbon (50 * 50 mm). The edges of the hole are fused with a lighter so that the edges do not fringe. Add the square with the circle together so that the slot coincides. A square measuring 20 * 50 mm, bend in half, fuse with the help of a lighter edge, fold again in half. The strip is inserted into the slot of the parts and stretched, we fix the gum, gluing it with a gun. We glue the base with the tape and glue it with satin.
  3. Glue the petals counterclockwise with a glue gun to the base so that the narrow side is connected to the base, and the "fluffy" is looking up. We glue row after row, carefully adjusting the details. Each row approximately includes 7 petals, gradually, as the area decreases with each row, the number of petals decreases to 1 or 2 at the very top of the bow.

Bows from tulle on chairs

Method 1

We take a wide bright contrasting ribbon of organza and tie it on the back of the chair so that the beautiful knot “looks” into the hall. Tying is carried out with an ordinary bow with threading the ends of the ribbon. Carefully straighten the resulting bow on the back of the chair.

Method 2

We throw a section of organza on the back of the chair, take the upper corners, wind it back, connect it to the lower layer of fabric and tie it to a knot, releasing the edges of the material. Gently pull the knot to the back of the chair and straighten the resulting bow.

Method 3

We throw a piece of material on the back of the chair. The free tissue is pulled together in a bundle and fixed with a ribbon and a strap. Beautifully spread organza.

Bow to the car of tulle

  1. We take a bright thin tape, thread it through the ring (bracket) in the trunk of the car, fold it in half, close the trunk of the car. After 30–40 centimeters from the “beginning” of the tape, we connect its two strips with a strong knot.
  2. Two more multi-colored wide long strips are attached to the passenger ceiling handle. We tie their corners to the handle and pull both ribbons through the window. We connect them with the “bottom” tape (which is attached to the trunk) as follows: we pass them under the bundle of the first, pull out and fix in the same place the second assembly of two strips.
  3. We perform a similar action on the second side of the machine: we pull out two more tapes, tying the ends to the ceiling handle, and fix the second end at the back of the machine. We fix it reliably, making a tight knot on each of them. We should get 5 knots.
  4. We form a bow. We take a wide ribbon in our hand, bend it to form a bow “petal”, tie it up so that the structure does not fray and break up in the wind. On the second side we form one more “petal” bow for symmetry. For greater splendor, you can fix in the middle a pre-made bow from organza from ribbons of the same color. It is also fixed with a thin strip. The free edges of the bow are folded in half and cut with diagonal scissors, unusual edges are formed.
  5. With small prepared bows, you can decorate the ribbons themselves, hang them on the car door or in other places by attaching them with an ordinary stapler. And you can tie a couple of soft toys or other figures symbolizing the newlyweds to the bow.
  6. We take a bright thin tape, thread it through the ring (bracket) in the trunk of the car, fold it in half, close the trunk of the car. After 30–40 centimeters from the “beginning” of the tape, we connect its two strips with a strong knot.
  7. Two more multi-colored wide long ribbons are attached to the passenger ceiling handle. We tie their corners to the handle and pull both strips through the window. We connect them with the “lower” strip (which is attached to the trunk) as follows: we pass them under the bundle of the first, pull out and fix the second node from two tapes in the same place.
  8. We perform a similar action on the second side of the machine: we pull out two more tapes, tying the ends to the ceiling handle, and fix the second end at the back of the machine. We securely fix the ribbons, making a tight knot on each of them. We should get 5 knots.
  9. We form a bow. We take a wide strip in our hand, bend it to form a bow “petal”, tie it with a thin ribbon so that the structure does not fray and break up in the wind. On the second side we form one more “petal” bow for symmetry. For greater splendor, you can fix in the middle a pre-made bow from organza from ribbons of the same color. It is also fixed with a thin strip. The free edges of the bow are folded in half and cut with diagonal scissors, unusual edges are formed.
  10. With small prepared bows, you can decorate the ribbons themselves, hang them on the car door or in other places by attaching them with an ordinary stapler. And you can tie a couple of soft toys or other figures symbolizing the newlyweds to the bow.

Bow of tulle and satin material on the dress

For manufacturing, you need a piece of light fabric (tulle), a satin ribbon (width 10 mm), a thread, a needle, sharp scissors, a gun for gluing parts. To decorate the middle of the bow on the dress, we need a ribbon of rhinestones.

  1. We attach a plate to the fabric, draw a smooth circle with soap or chalk, cut it out.
  2. “Zhiulim” cut a circle around the perimeter, tighten the thread to get a “bag” of fabric, fix the thread.
  3. We turn the part over and continue flashing with a basting seam from the edges to the middle. We tighten and the product will take the form of a bow. Once again, fix the thread.
  4. The ends of the ribbon are fired with a lighter. Cut a piece of ribbon a little more than the width of the product, glue with a gun.
  5. We decorate by gluing a ribbon of rhinestones. Previously, the strip of rhinestones, too, the edges are seared with a lighter. Lightly press the satin ribbon and with rhinestones with your fingers so that they stick well to the fabric.
  6. We glue the brooch holder or pin to the resulting bow, greasing it liberally with an adhesive base.

It is easy to craft such an ornament on a dress in just ten minutes, it is enough to have several pieces of fabric on hand, a little free time and a little patience. They can decorate the dress, and the blouse, and the handbag, and even weave it into the hairstyle. You can perform it from tulle of the same colors of the gamut or from fabric of a contrasting color.

Working with beautiful noble tulle is a pleasure. This material is easily draped, sewn, has a decorative look. It is used for decoration of festive halls, manufacturing of accessories, jewelry for clothes. Handmade is a fairly popular and fashionable art that does not cease to amaze with its beauty, originality of ideas and ease of execution. For example, you can make a bow for a girl in a garden or school; to make a wonderful decoration for an anniversary or festive evening, surprising guests with the original design of the room.

Handicrafts made of tulle are also indispensable when decorating a wedding table, cards, invitations, decorating holiday bottles and creating decorative pleasant little things. But one of the most important decorations is the decoration of the car, where the young will go to the registry office and for a walk around the city. It is a combination of satin and tulle that will give a holiday atmosphere to jewelry made by hand, and at the same time will convey all the warmth of the hands of a person decorating a car.