The most interesting solution will be to cover the countertop with bright plain fabric, and cover it with a lace cloth from above. This move gives the room sophistication and cozy warmth.
Textile products for the table vary in shape:
- Square;
- Oval;
- Round;
- Curly;
- Hex.
One of the most common is a round tablecloth. On the Internet there are many options for the execution of this charming little thing. Any needlewoman, despite her skill level, will find a suitable option for herself. To decorate your interior, you need to spend a little free time and get acquainted with the stated material.
Knitting materials and tools
- model selection;
- material acquisition;
- tool selection.
Yarn
For the manufacture of airy things, it is preferable to use a thin viscose, silk, cotton or linen thread. A fiber of 450-500 m / 100 g will be suitable. Medium yarn (350 m / 100 g) is also suitable.
Reference! To determine the best fiber to work, you need to connect several samples from different threads and compare them with each other.
Hook
The tool must match the fiber . Its number can be determined by folding the thread in half and comparing the resulting volume with the thickness of the hook head.
Model
The choice of model for the manufacture depends on the individual vision of the craftswoman. The following round tablecloths are available:
- simple canvas pattern;
- lace with the use of Bruges lace;
- drawings in filet technique;
- motives connected in a single canvas.
Let's look at each option with a detailed example.
Simple tablecloth for beginners
For inexperienced needlewomen, the easiest thing is to create a little thing, which is made with a continuous cloth from the center, in a circle, a single piece. In size, it may look like a large napkin covering the central part of the countertop, or it can hang nicely from the sides.
To knit a round tablecloth, you will need cotton yarn (500 m / 100 g) and a No. 2 hook .
Completing of the work
- Dial a chain of 12 in. n. and lock it in a ring.
- Next, knit according to the pattern.
- After knitting, carefully hide the tip of the thread. It can be tucked in or glued to the inside with a clear gel;
- Carry out a wet-heat treatment, while straightening the air arches.
Attention! To give the subject more plasticity, you should slightly starch the little thing. To do this, immerse it for a while in a solution of water and starch.
Openwork tablecloth
For experienced craftswomen, the following model will not be difficult to implement. Such an element of decor will give your interior, in addition to coziness and warmth, notes of sophistication and aristocracy.
For the manufacture, use very strong yarn (550–600 m / 100 g) and a hook No. 1–1.5 .
Process of creation
- The canvas is created according to the figure below.
- According to the scheme, connect the central motive. This requires knitting the tape, making connections in the right places. In this case, turns are made in short rows.
- Then tie the workpiece with a strip.
- Next, run the outer strip and connect it to the part using a spiral of air loops.
- The patterned border is joined in the same way.
- Hide the ends of the thread.
- Provide WTO products.
Reference! You can increase the size of this little thing with the help of several additional strips with air spirals.
You should also transfer the lace pattern to the paper and periodically apply a canvas to it when working. So you facilitate the process and be able to notice the error in time.
Fillet tablecloth
Fillet round web can be created in two ways:
- knit from the center in a circle;
- perform work from the edge, adding and decreasing cells to give shape.
In the first example, the part begins with a ring made from air loops.
Work process
The model consists of ten wedges that are created according to the drawing.
Between the wedges, air arches are knitted. Crosses indicate filled cells that form a pattern.
Cell Fill Pattern
At the same time as reducing the wedge, knit between the cells of the fan from the air arches. After finishing work, remove the ends of the threads and perform a wet-heat treatment.
Reference! When choosing yarn for loin cloth, special attention should be paid to the matching of thread and hook. Too loose knitting will look ugly and messy.
The columns filling the cage should fit snugly against each other without forming gaps. For fillets it is better to choose yarn of medium thickness with parameters of 350 g / 100 m .
Round motif tablecloth
Products from motifs usually have a rectangular or square shape, but to create a circle out of them is not so difficult. The item can consist of individual elements, you can also bind the product in an unseparated manner.
For the embodiment, take cotton yarn and a suitable tool.
Work description
- To begin, make the central element according to the scheme of a large motive.
- Tie the part in two rows made by air arches.
- Then knit two rows with fans and three aerial arches.
- Next, perform the required number of motives, attaching them in the last row to the workpiece and joining each other.
- Tie the resulting canvas with a border according to the pattern.
- Hide the ends of the thread. They can be tucked inside the knit or gently glued to the wrong side.
- Spend the WTO.
If desired, the little thing can be starched . This action will give additional protective properties to the material and make the canvas more plastic.
Advice! If you want to increase the size of the tablecloth, then do another circle of motives.
The look of your home is an opportunity to demonstrate your creativity to guests. And also to transform the interior and give it personality and coziness. Crocheted tablecloth will help to achieve this.
