How to tie a scarf on nicknames?

The basis of the image is the lower scarf. Its correct name is mihram. A lot depends on how he lies on his head: whether it will turn out to be a beautiful hijab, whether it will fall off from the wind or physical activity.

There are 3 main types of lower scarf:

  • bonnet;
  • traditional miram (rectangular section of muslim, canonical size: 150x40);
  • model with a bifurcated end (one side is normal, and the second is cut).

What rules should be considered?

  1. To create a rich look you will need a lot of fabric. Therefore, it is worth taking not one, but two shawls. Of these, you can make a contrasting duet.
  2. The material should be airy, but dense. It is worth paying attention to the atlas-stretch, chiffon, chiffon-stretch.
  3. Translucent shawls are not suitable for the occasion.

  4. To prevent the fabric from slipping, use the base cap; the scarf is attached to it with needles. It is possible to use brooches and hairpins. As a decorating element, a diadem or a necklace can act.
  5. Screaming colors are not allowed on nicknames. Better pick a shade of white to your face. Other light shades will also be appropriate.
  6. The event does not ascribe a certain way of tying, only makes several demands on the appearance of a woman. Be sure to close your forehead, neck, hair.

Important! A professional who provides services for tying scarves on nicknames takes about 40 minutes to an hour and a half to create an image of one bride. For an ordinary woman, the procedure will take even more time.

Also, the girl should worry in advance about applying makeup. Putting on a skin tone with a scarf on is too risky. Closed areas will eventually begin to differ in color from unclosed.

What does it take to get started?

Today, there are many types of bonnet, which is used as the basis for the scarf. Practice shows that the most comfortable and practical are the models from the atlas, which completely cover the head . A good solution is to buy a product that is tied at the back. This option will not unnecessarily compress, but will not subside. If you can’t get a satin bonnet for some reason, take the usual cotton or knitted, but with lace inserts. Their presence will help to avoid the effect of everyday life.

Since the scarf is attached to the boom using safety pins, you should definitely buy them. The ideal option: the steel is silver, and on the top is either not painted, or matches the tone of the headgear.

Hair is collected in a bun. He will need hairpins (for thick hair it takes 6-8 pieces, but for non-professionals, the costs may be higher) or an elastic band. The latter is selected based on the color and volume of hair. If there is not enough density, look at the wide models. Options that mimic natural curls or made of them will look exactly fine. Volumetric macaroni gum does not fix hair well . The aesthetic component is assigned to it, and the practical side of the issue is solved with the help of small elastic rubber bands.

Brooches, jewelry and jewelry will help distract attention from clips, pins and fasteners (the last item is only suitable for economy weddings, you should not buy them if a luxurious celebration is expected).

Popular forms of headbands:

  • the sun;
  • snowflake;
  • a drop;
  • petal;
  • light.

Crowns and tiaras look great. Both gold and silver items are allowed. Moreover, the latter are more preferable. The comb can also be used. Especially interesting are the options with white pearls. Do not be afraid of complex patterns and weaving. Massiveness is also acceptable.

Another way to decorate a scarf is to put a pendant on your head. Allowed the use of colors. They can frame the entire head, look like an analogue of a wreath, or be present in small quantities.

Earrings at the wedding are also permissible, but the general requirements for the appearance of the bride must be taken into account. The scarf must hide the ears. This means that small, neat products simply will not be visible. Discard them in favor of hanging earrings. At the same time, try not to get out of the general mood. If you decide to wear a silver diadem with a certain stone and pattern, then other jewelry should have the same ornament and the same inserts.

Important! If the edge of the stole is embroidered with golden or silver stitching, then it is worth to refrain from additional forehead jewelry. Framing must also be considered when tying a scarf. Let each new layer go a little further from the forehead.

Ways to tie a scarf in stages

There are several classic methods. From each other, they differ in the base - the lower scarf. The hardest thing to work with traditional mihrams. Putting it on takes much more time than putting a bonnet on. However, you should be able to wear a hat. Without experience, it is difficult to calculate the force with which you need to tighten the product. If the procedure is carried out for the first time, it is worth giving preference to tight-fitting models on an elastic band . True, they look worse. Consider the step-by-step instructions for tying a scarf on nicknames.

Classic muslim method

  1. Throw a scarf over your head so that the hairline, ears and forehead disappear. One end should end up longer than the other .
  2. Tie the edges on the back of the head.
  3. Circle the forehead with the short end. Fix the end in the temple area with a pin or needle.
  4. Wrap your neck around the long end. Bring to the opposite temple. Secure with a safety pin.
  5. Pull loose ends back. Fasten together. Make sure that the fold under the chin hangs beautifully.
  6. Decorate the head tied with a scarf, jewelry.

With bonnet

Pick up the boom. The hat should be made of elastic material that sits well on the head, does not slide off it. It is acceptable to use a lace product sewn to order specifically for the upcoming event.

  1. Place a triangle-shaped handkerchief over your head. In this case, one end should be shorter than the other.
  2. Cross around the neck and push the edges of the scarf forward.
  3. With the long end, wrap the neck again and secure it in the temporal zone.
  4. Short swipe to ear. Fasten next to the temple.
  5. Create beautiful folds and slopes in the chest area. Lock the position of the fabric with brooches and clips.

Of two scarves

Try to use the same color and texture of the upper and lower stoles . This will eliminate the problems that arise when a hijab is moving out. Tying method (suitable for mihrams as an ordinary scarf):

  • to twist hair with a plait;
  • position the mihrams (lower scarf in the center) in the center of the head, bring the tips forward;
  • pull the front ends in different directions, twist;
  • holding one end with your lips, fold the second into a ribbon shape;
  • repeat the procedure with the second tip;
  • with the first end, wrap the head, fasten it behind the neck;
  • wrap the head with the second end, fill the rest under the fixed mihram;
  • tie the second scarf so that one end is longer than the second;
  • circle the neck;
  • beautifully lay the long end on the chest and fix it with a clip or a pin;
  • Take the short edge to the temple, secure with a pin.

Tying for a double-ended miram:

  • center the assembled part on the head;
  • take the ends back, twist;
  • fold the ends with ribbons;
  • wrap your head around one end;
  • wrap the head with the other end so that the intersection of the ends is in the middle of the head;
  • repeat the procedure until the tissue runs out;
  • then tie the second scarf in the manner described above.

If the tying procedure seems very complicated, and the ready-made options do not suit you, contact a professional or buy a ready-made turban with a veil. The last option will not look strange or ridiculous at the wedding. He will not fall, as he rests on his head with elastic or ties.