Pattern of a men's cap: 6 and 5-blades and flat (French)

The cap is one of the favorite and comfortable hats. It is worn by men regardless of social status and age. Fans of exclusive things set themselves the task of making caps themselves. However, few dare to do this, because building a pattern is a rather time-consuming process. Next, we consider the features of the preparation of the drawing and sewing the product with your own hand.

Types of caps

The assortment of this type of product is diverse: some models are known as unisex, while others, on the contrary, emphasize gender differences. If desired, it is easy to find any cap: sports, festive or for permanent wear.

The accessory can be worn year-round. There are both lightweight options for the summer, and insulated for the winter and off-season.

Types of men's caps: //tkaner.com/golovnye-ubory/kepka/vidy-muzhskih-kepok/

Eight-Blade Cap Pattern: //tkaner.com/golovnye-ubory/kepka/vykrojka-kepki-vosmiklinki/

How to sew a six-link men's cap?

To begin with, you should prepare the fabric and the necessary devices. To get a cap that is perfect in size, you need to take measurements of your head and build a drawing. Sewing a men's cap with your own hands is much easier than it might seem at first glance.

Materials and Tools

As fabric, you can use natural and artificial leather, cotton and wool materials, velveteen and even fur. Also prepare in advance :

  • sewing machine;
  • scissors;
  • duplicate fabric;
  • threads in the color of the main material;
  • pins
  • centimeter tape;
  • a sheet of cardboard;
  • a simple pencil;
  • bar of soap.

Attention ! For summer products, choose natural fabrics such as linen, calico or chintz. For winter options, a denser texture with lining and insulation is suitable.

Pattern of a men's cap 6-blades with a peak

One of the popular types of men's caps is a six-link . To make a pattern, observe the following sequence of actions:

  • Measure head circumference and length. Then also the width of the forehead from the occipital side to the forehead.
  • As the lower segment, take the segment equal to one sixth of the circumference of the head.
  • Find the middle of the segment and lower the perpendicular equal to half the length from the back of the head to the forehead.
  • Then draw a rounded tangent at 3 points.
  • The resulting corner should be equal to 60 degrees.

Mono patterns can also be based on an old unclaimed accessory . It is split into components that are circled on a Whatman paper or cardboard. This is the easiest whip up option. If an unnecessary product is not available, then the pattern is built.

We cut out a peak

To cut a visor, draw a line equal to the width of the forehead. The resulting part should be smooth and resemble a crescent. As a basis for the plank, you can take a rectangle equal in length to the circumference of the head, and about 2-3 cm in width.

Reference! There are also special free programs that allow you to make patterns of caps of various difficulty levels. It is only necessary to enter the parameters of the head and print the drawing.

Cut on fabric

The pattern is drawn on a sheet of paper or old wallpaper, and then they make a layout on the material, circle and cut it out. To sew the product, you must have at the disposal of two visors, six wedges and pegs. Similar items should be cut from the duplicate and the lining . If the product is sewn from checkered textiles or fabrics with a different geometric pattern, then the pattern should be located so that the images on the wedges are the same or combined with each other.

Important! Do not forget to lay allowances for stitching parts - one centimeter.

Sew details

When all the components and tools are ready, you can start sewing in the following sequence:

  • In order for the thing to sit perfectly and keep its shape from the outside, we glue the elements with non-woven.
  • Then we connect the bottom wedges first by hand, and then by typewriter.
  • On the face we lay the finishing line.
  • Stitching the details of the lining. If the product is intended for the cold season, then the lining is quilted with a synthetic winterizer or other insulation.
  • Hardness visor gives a special insert made of cardboard and non-woven.
  • Visor elements are sewn together and notches are placed on them.
  • Elements are turned on the face and a decorative stitch is laid.
  • Next to the top we attach a visor and a band.
  • It is convenient to grind a lining manually, using a secret seam.
  • From the inside, small rectangles (“ears”) can be sewn to the stitch, which will protect the ears from strong gusts of wind and cold.

Men's 5-blade cap

Next, we will study in detail the process of sewing a cap of five wedges for a girth of 51 cm. The dimensions of the product are easy to increase by expanding or narrowing each wedge. The difference is evenly distributed at all seams. So, if the task is to increase the size to 54 cm, then 3 mm are added on each side of the segment. To make sure the size is correct, you need to multiply the bottom length of the wedge by five.

In this case, the total amount should coincide with the girth of the head . It is also easy to increase the number of wedges to six, making the necessary changes.

Tweed Hexagon Cap

For sewing, you need to buy 0.3 m. Fabrics 1.5 m wide, a sealant and non-woven fabric. Then follow the instructions:

  • We distribute the elements on the fabric. The length of the drawing should be 53 cm and a width of 4 cm. Also make allowances for seams up to 1.5 cm.
  • Sweep the wedges together, strictly observing the marking lines. Then sew the seams in the machine way and remove the auxiliary threads.
  • Cut allowances to 7 mm and iron parts.
  • It is convenient to process the slices with an overlock, but if it is not there, then use the edging or ribbon.
  • Sew the hem on the front side.
  • As a sealing material, a piece of cardboard or plastic is inserted into the visor. In an option, an ordinary soda bottle is a good fit.
  • Then sheathe the details of the visor and grind the outer sections.
  • The allowances on the visor are cut to 0.4 cm.
  • Turn the visor onto your face and iron it.
  • Decorative trim on the visor is done at a distance of about a centimeter from the edge.
  • On the top and visor make midline marks.
  • The visor is connected to the bottom of the body along the marks.
  • The stub is sewn into a ring and fixed with a tulle.
  • Next joins the visor.
  • Seam allowances are cleaned, and ironed in the direction of the strip, which previously turned inside out
  • The inner part is unscrewed and sewn, and on the lash make stitching in parallel with the bottom of the cap or separately.

The product is ready.

Cap "French" (flat)

There are other men's caps, now in trend, for example, a flat cap “French”.

Cut out of velvet with lining:

To build a pattern and make a man’s cap with his own hand is real. The main thing is to show a little perseverance, patience and understand the construction of the drawing. The easiest at the initial stage will be sewing a six-blade and five-blade cap.