The hands of the master are ready to create such masterpieces that are not always found on store shelves. But for a beginner, there will always be a couple of models that he will easily perform using schemes and a detailed description .
In this article, you can find some of the simplest models of bandanas and more complex works that require attention and time. The detailed description that pursues each product will not leave questions regarding the work.
Yarn and hook
A bandana can be made from different yarns. Only it should not be prickly, as it will come into contact with the delicate skin of the face.
For a summer and light bandana, you should look for something from cotton. It can be iris of different thickness. But a bandana can also be created for the cooler season, and a series of yarn with acrylic, with the addition of merino wool, is well suited. Good and appetizing models come from mohair, not too thick.
There is no particular measure for a bandana. But it will be a shame if after long labors it will be difficult to tie around his head. Therefore, for your work it is worth measuring the length of the circumference of the head . Add 20 cm or more to the ties. Make this figure the longest side of the product.
Before any knitted product is a number of things that need to be done. Even masters always make such important preparations.
Set of first crochet loops
The product does not do without a sample - this helps to make even calculations and tie the product exactly in size.
First Chain Set
A square canvas of small size is knitted and the ruler determines how many loops are 10 cm and the desired number of rows. These numbers make up the density of knitting and it further helps determine the loops and rows for the entire product.
Bandana for the beginner
The simplest product that can be found on the Internet is a product with such a simple pattern. But he looks so pretty. It is interesting that initially only handbags and rugs were made from it. Now such a simple pattern easily dilutes children's blouses and many, many things. The pattern was no exception, and snow-white yarn made the product even more attractive.
- iris yarn;
- hook number 1.75.
Dial the required number of loops, pay attention to the required size and rapport. Knit the first row according to the scheme and then begin to decrease.
Make reductions in each subsequent row, half the rapport at the beginning of each row. First, an uneven edge will be obtained, but then these defects will be fixed.
End of product
Knit until rapports run out. It will stop when there is only one prominent rapport.
Tying is done with simple single crochet columns . They smooth out all the unevenness of the canvas, which resulted from the reduction of loops in each row.
If all sizes are counted correctly, a bandana will definitely work.
This charming model looks luxurious, thanks to a thick cotton thread and slightly starched fiber. The shell pattern also makes the product dense and at the same time presents beautiful lace elements to each shell. Many girls dream of trying to make this headdress. Right now, all the secrets of this wonderful product.
- cotton thread of medium thickness;
- hook number 2.
To create this headgear, you will need to tie a sample and calculate how many rapports are needed for length and width. You can calculate everything and you can start the product.
Knit the first row over the corresponding number of air loops. No reduction, respectively, is not yet required.
Decreases must be started from the second row and then done in each row at the beginning and at the end, so that there is a symmetrical bevel of the product. If you reduce by the whole rapport, you will get a very short product and the bevel will be too noticeable. In this reduction pattern, make 1/3 of the whole rapport.
Stage: the last row should consist of 1 rapport and act like a corner of a scarf.
So that after knitting the product there are no bevels and irregularities in the canvas. Ideally, you should get an even triangle isosceles, not necessarily equilateral. Harnessing is a handy step that is also crocheted.
On this knitting is over and you can try on.
Mesh products are very popular . In hot weather, they are very comfortable and light. A thin thread and a fancy pattern will make such a thing very elegant. The bumps will add extraordinary . Despite such a complicated presentation, a great hat fits very quickly. It is necessary to understand the scheme, and then you can already knit without peeping.
- white cotton yarn, you can use a thread of iris;
- hook 0.95.
Make a set of loops for the length of the product. This will be the longest side. For measurement, it is necessary to measure the circumference of the head, and make allowances for the length of the corners when tying. The first row to perform unchanged.
Making downs for a loin mesh diagonally is very simple. Since the grid consists of squares, you just need to knit not a square, but a diagonal, and the result is a triangle instead of a square.
Reduce until the last box is left . Run it and knitting on the main pattern is over. This box must be a must. The result is a very beautiful isosceles triangle. Some may have an equilateral triangle, but not necessarily.
Throughout the handkerchief make tying columns without a crochet . On the longest side, two such rows must be made, and the last is a handy step.
A similar model with an equally charming combination of large mesh and blue is also good for summer.
Not only summer models can be performed. Beautiful and unique models for the colder season . Many well complement short jackets and become an indispensable accessory. For more extravagant ladies, a model with multi yarn and fringe is provided, it will definitely make the image unforgettable.
yarn in thickness with a baby pechora of medium thickness;
hook number 2.
This is a very interesting bandana hat model . It is sometimes called a bandana trick. In the center is an ordinary crochet hat made of crochet posts.
The cap is knitted according to the above pattern and added to the desired circle, and then simply knit rows without changes until the desired length is reached.
Separately, the tail of the cap is tied. To do this, from a third of the loops, knit straight and reverse rows of single crochet and make reductions in each row, one column on each side. Do this until one column remains, which will act as a corner. Tie with two rows of columns with one crochet, and in the corner make a rounded corner.
Important! To get a rounded corner, you need to knit two columns with one crochet in one previous column in three places of the corner.
The remaining loops on the cap itself will also come in handy. For the lapel, these loops and an additional 40 loops are required, 20 on each side . Knit rows across the entire fabric of columns with a single crochet. In each row, decrease by one loop from each edge. This will make a small bevel to simulate a scarf. Knit for a lapel only 5 rows.
Try on the hat and tie the lapel with a knot at the back of the head over the hat. Here is such an interesting product.