Knitting needles

Not so long ago, berets entered children's fashion. How cute the girls in these hats look. They immediately become a little older. A very beautiful image is obtained in addition with a snood or a small scarf. And the girl always wants to be a little like her mother, so the idea of ​​a knitted beret will definitely like it. Then, two beautiful models of berets for girls are presented, which the master can make from children's yarn and a suitable pair of knitting needles. There is also little information about which strings are more suitable for such products and how it is more convenient to select knitting needles for work.

Yarn and knitting needles

For a children's beret, just like for any other hat, you will need your own yarn. It can be fiber from a series of children's yarns. It is recommended for the child to use medium-thick yarn. Since it is a very thick thread, it can not only make the product warmer, but also make it heavier.

It will not be so comfortable to wear this product and therefore it is better to use special linings for the purpose of warming. And instead of ordinary children's yarn with a lower wool content, use fiber with a higher wool content. But any yarn must necessarily satisfy such requirements. This hypoallergenic composition of the fiber and the softness of the future product.

Set of stitches for 2 knitting needles

Knitting needles should be selected depending on the model of the original product. Many hats are made using stocking knitting needles . But it takes a completely different matter, such a working field may simply not be enough for a row, therefore it is convenient with circular knitting needles . The following are two lovely models of berets for girls that can be performed by a master and one who has recently mastered this craft.

How to knit a children’s knitting needles?

It is not so difficult to make a beret with knitting needles. First, the master selects the material and selects the number of needles to it. Then carefully makes measurements for the child .

For a beret, it will be necessary by the standards to perform some additions and decreases of centimeters. Further, a small sample will help to perform the correct set of loops. But there will also be rules for the sample . It is important to knit a sample with the same knitting needles, which will be further used for work. It is also worth applying the basic pattern for the product.

Takes a simple knit with flower decor

For some models, you need to run several samples at once, since different places can have different patterns, which in any case will have their own density of knitting. Since it is precisely this indicator that will need to be determined by the sample. Two cute models of hats for girls next and a description of them with the attachment of schemes.

Beret for a girl with a volumetric flower

Berets decorated with voluminous flowers look very beautiful. Such flowers can be made with knitting needles or crochet. Girls will like this alternative to ordinary bows. And such flowers are suitable for any pattern with knitting needles. Read more about the interesting beret model, which runs across the rest of the article.

To work, you will need:

  • yarn for a beret from a series of children’s medium thickness;
  • knitting needles for the thickness of cooked yarn;
  • a hook for performing a lush flower.

Merki

To measure for a hat you need only two measurements. The first measure is the circumference of the child’s head . The second measurement is more complicated - this is the depth of the product . For her, the tape should be applied from the edge of the lobe of one ear to another. Place the tape through the crown. Next, the resulting number should be divided by 2 and make an increase for a beret of 7 cm. For the first measurement, it is better to make a decrease of 2 cm. So the hat will be denser and will not become a different size after washing.

Garter stitch

Sample

Make a sample according to the pattern of garter stitch . It should turn out in the form of a small square. Then calculate how many loops in this sample turned out to be 10 cm, and how many rows turned out to be 10 cm. It is imperative to stretch the canvas a little before measurement to make the measurements more clear. After the calculated density of the knit, determine the required set of loops.

Rubber

A very interesting model of this beret. In fact, it is not so difficult to carry out. First, you will need to knit a gum from a garter pattern . The width of the gum is about 7 cm. But the length should be equal to the head circumference.

The basis

The base itself is made with front stitch, and after every 6 rows a garter stitch is inserted for 2 rows. In order to determine the length of the base, it will be necessary to take the gum width from the depth of the product, this is 7 cm. Next, make a set of loops according to the new measurement and start the canvas with the front surface. Knit a fabric with a slight offset . To the right, here you just need to add loops. But for the other side, on the contrary, use shortened rows.

Front surface

Important! To perform a shortened row, you just need not to knit the loops to the end of the row, but simply turn the canvas between the loops.

Knit according to the prepared pattern length equal to the circumference of the head. You can immediately knit with accession to the elastic. At the same time, observing the handkerchief inserts so that they coincide with the stripes on the elastic band.

Flower

It is advisable to make the flower with a hook according to the above diagram. You can make it a little more magnificent, just knit more rows to complete it. But those who do not know how to crochet can make a flower using ordinary knitting needles. Below is a diagram of a flower using knitting needles.

Crochet flower

Assembly

For assembly, you will need to sew a flower, and tighten the loops along one edge of the beret (this is the crown). A side seam can be made using a hook or a needle and the same skein of yarn.

The product is ready and you can safely try it on and tie additional snood for it. For a snood, it will also be possible to use garter stitching and its combination with facial stitching.

Knits with unusual knitting

The model will captivate with its pattern and cheerful pompom on the top of the head . Girls like these things. The little girl’s face looks especially good in such a beret.

To work, use:

  • soft pink yarn (for children);
  • knitting needles in thickness to children's yarn;
  • fur pompom.

Merki

Measure two sizes to fit the model. This is the circumference of the girl’s head and depth. For the first, you need to immediately take away 2 cm. For the second, add about 6 cm.

Sample

The pattern is very mysterious, and so be sure to try to knit it in the form of a small canvas before making the cap. Also, the canvas further serves as a starting point for calculating both the density and the number of loops for the initial set.

Rubber

Very thin and almost invisible rubber band, but it is still present in the model. This is an ordinary gum 1 * 1. But a very elegant thread makes it so sophisticated that it looks very luxurious, next to such a massive mesh of weaves. For gum you need to knit only 4 rows. And then it will still need to be tucked and hemmed.

The basis

For the base, you need to make small additions to get a small volume, which will make the beret even prettier. A quarter of the loops from the set of loops necessary for the head circumference should be added. Next, knit half a depth measure without adding, and generally without changing the number of loops. Then do for the crown of the diminution. Usually for a beret this is a very sharp decrease, but here it’s easy to make 8 loops in each row. After reaching the desired length according to the depth measurement, you will need to collect all the loops into one, and tighten it tight.

Assembly

For assembly, you only need to tuck a thin elastic band, and sew it into the inside. So that from this she does not lose her elasticity, it is better to do this with the help of a special elastic thread. But the thread must be matched to the tone, yarn, so that when stretching the elastic, nothing sticks out from under the beret. The last element in this beret will be a fur pompom - sew it on the top of the head.

So, a cute novelty is ready. You can try on a child.

Popular corn pattern and beret flowers

Different volume patterns with knitting needles become very popular . One of them has recently been ready to overshadow the acclaimed English gum and here it is. This is a pattern called "corn."

To implement it, there is one scheme that contains the elements of yarn and loops knitted together.

The scheme "corn"

Berets with voluminous applications have become very fashionable. These are not only beautiful bows, but also openwork flowers. It is not necessary to crochet them. There are very beautiful models that are easy to perform and familiar knitting needles.

In general, so many beautiful and fashionable things surround us ... It is important to take the time to do stylish things with our own hands.