How to sew a raincoat with a hood (pattern)

A raincoat is a convenient and practical thing that protects from the weather. Put in advance in a handbag, it will save both from a small rain, and from a big rain. There is no doubt that this type of clothing is in demand, since it is much more convenient than an umbrella.

Differences raincoat

Sew such an indispensable thing, unlike other types of clothing, you can do it yourself for five minutes from improvised materials. Special patterns for this are not required . Particular attention should be paid to the choice of fabric, because it should be waterproof. In addition, compared to other raincoats, the rain cover is very compact and does not take up much space.

The choice of style and fabric

For sewing a raincoat for a woman, a waterproof and repellent fabric is used. It can be bought both in specialized construction departments and in sewing stores. It is necessary to check with the seller the level of moisture protection and breathability of the fabric.

Such fabrics are used for sewing clothes for sports or travel accessories, such as tents, tents or special suits. Since this wardrobe item is not designed for permanent wear, it is better to resort to cheaper materials, such as polyester or ordinary polyethylene fabric.

On a cloak of average size it takes about 2 meters of material.

Important! According to the style there are two options for raincoats. This is a raincoat sewn from two squares or a semicircular raincoat. Raincoats can be different in length and width. It all depends on personal preferences.

Wide raincoats are convenient, under which you can hide a bag or backpack. For sewing, you may need lightning and other accessories. Many craftsmen learned how to sew raincoats from dense, comfortable IKEA bags.

Taking measurements

You can sew a raincoat on your own, following the advice and recommendations of experienced craftsmen. An important measure is the length of the product, which is chosen depending on growth and personal preferences. You can take a centimeter tape and use it to measure the length of other types of outerwear and choose the best. Usually they prefer to make long raincoats to protect the body from moisture as much as possible.

For example , a semicircular cloak will require 2 lengths. It is necessary to add from about 20 cm to the notch for the neck and processing of the bottom of the product. Also, if necessary, you need to measure the arm length and neck circumference . More sophisticated models may also require hip and chest girth. Here are the simplest quick-fix options. Free raincoats without patterns can be sewn for the whole family.

Raincoat pattern

In order to start work, you need to prepare the necessary materials: a piece of special fabric, chalk or remnant, a centimeter tape, a large ruler, scissors, a needle and thread and other accessories. First you need to draw a pattern. Its power to draw even a person far from constructing.

Raincoat without a pattern

A rectangle 180 cm long and 150 cm wide can be drawn directly on the fabric. It needs to be cut, folded in four layers and draw the desired shape on the eye. Then, connecting two points in a rounded line, cut a hole for the neck and sleeves. Shelf cut in half.

Raincoat pattern 2

Attention! To build a hood pattern, two squares are cut with sides of 40 centimeters. You can build on paper or oilcloth. The pattern can even be connected with adhesive tape and try on. If something was not pleasant during the fitting process, it is better to make changes immediately before stitching the main parts.

Raincoat pattern 3

You can make a raincoat like a cape. The fabric is folded diagonally and a semicircle is built on it. Its radius should be equal to the length of the arm. Then the neck is cut out and an incision is made in front.

Raincoat pattern 4

Hood pattern

A hood is cut out on a separate piece of the remaining material. The advantage of a raincoat in the form of a stole is obvious. This option is suitable for those who do not have a sewing machine. This product is made without seams, and the master does not have to worry about their connection.

If you want to create something unusual or design, then it is always better to use ready-made patterns. It is also quite simple to circle the existing raincoat and make a new one.

There is a way to make rain raincoat strictly in its shape. To do this, take your favorite long-sleeved sweater. Next, put it on a sheet of paper folded in half and outline the edges in the form of a semicircle with a margin. From the resulting edge to the end of the sleeve should remain approximately 10 cm on each side. From the bottom of the sweater to the edge of the paper, the required margin should be at least 20 cm, depending on the desired length of the product.

In the part where the neckline was on the blouse, we draw a recess for the neck. Hand recesses are measured strictly along the sleeve. We put it on the edge of the paper and at the location of the shoulder we begin to cut off the round hole a little more than the neck. Then we cut the paper from the neck to the base on only one side. Cut one sleeve from the rectangle. The hood can also be depicted according to the existing thing.

Work stages

The sewing process proceeds in the following sequence:

Joining the side seams of the parts obtained using a sewing machine or manually. Before grinding the parts can be connected to each other with pins. For greater strength, they are strengthened with an oblique trim.
Sewing on the hood . To do this, it must be attached to the neck. The length of the neck should match the length of the lower edge of the hood. The front edge of the hood is recommended to be hemmed immediately by folding the fabric inside out twice.
Processing oblique piping sleeves, bottom, edges and hood. This is done both for beauty and to give strength to the product. You can simply bend the edge and flash it on a typewriter. In whipping products, processing may not be performed at all.
The choice of material and manufacturing technology of fasteners, if any. It can be ties, buttons, velcro or buttons. It all depends on the personal preferences of the wizard. To keep the fastener on polyethylene, it is recommended to put a transparent button under it.
Product decoration. The raincoat can be decorated with rhinestones, applique or draw interesting drawings with indelible paint.

Reference! There are a large number of styles of the hood. For example, it can be on a rack or removable. As fasteners, buttons, zippers or Velcro are used. The upper section is decorated with drawstring or decorative elements.

You can sew a raincoat on your own very quickly. The main thing is to choose a good waterproof fabric and choose the right length of the product. Having shown a little imagination, the cloak can become not only useful, but also an exquisite wardrobe item.