There are non-standard situations in which our glasses are subjected to sudden damage. For example, when repairing, liquids, gels, and even glue that instantly sets can get onto the glass . And to remove it is not possible without damaging the surface of the lens. What to do in such cases? Get rid of optics, without which we are helpless? In no case, if it is made of glass, then there is a way out. Here are some tips you can use to solve this problem and remove the glue.
Features of removing glue Moment from glasses glasses
Never use to remove glue from glass lenses:
- heating - high temperatures will lead to cracking and damage of not only the lenses, but also the frames;
- coarse objects in the form of a sponge, sandpaper, metal washcloth. They will ruin the optics, leaving deep scratches on it, after which its use will be in question. When worn, this will cause a feeling of discomfort and a decrease in viewing quality.
Methods for removing traces of superglue from lenses
Try to correct the situation with more gentle and effective means.
Oil
Soap
Dilute liquid soap or dishwashing detergent with water at least 30–40 °. Rinse the optics with a piece of foam without resorting to intense friction.
Acetone
If the previous method did not give a positive result, you will have to use an acetone-based nail polish remover. Since it acts most sparingly than pure acetone . With a cotton swab moistened with it, we wipe off the pollution without applying pressure.
Dimexide
Gasoline
Gasoline or solvents based on it remove glue smudges when a cloth moistened with them is applied for 15–20 minutes several times. If there is a rubber spatula, carefully using sliding movements we try to remove the problem layer.
Wiper blade
Dissolve the sticky substance under the power of this universal fluid, which will cope with the contaminated area. Wet it, after a few seconds the softening reaction will begin, which will allow you to easily remove traces of superglue.
Anti-stick
White spirit
The sticky layer is wiped with a napkin, which is then placed on top of it for 15 minutes. If the first time does not help, repeat the procedure. Then gently remove with a dry soft cloth.
Hands
In addition to the tips, I want to caution that all products are dangerous for both plastic and sprayed metal frames. Getting on it, they can cause a change in color and structure. Therefore, when applying to a stain, do it as accurately as possible.