However, in some cases, people are faced with a problem when the slider or all the lightning breaks. This can happen for various reasons: prolonged use, mechanical damage, tearing, ingress of dirt ... In this case, the fastener does not fulfill its purpose and cannot connect the edges of the product. Typically, product owners turn to a workshop or atelier for assistance in rebuilding a castle. In this case, the wizard simply replaces the slider or inserts a new zipper.
But often the question arises of self-repairing the product. In our article we will tell you what to do if the zipper on the boots breaks.
What will be needed for work
To begin with, it is worth preparing all the necessary tools and materials that will be needed to complete the work. For convenience, use the following list.
- Pliers or pliers to grip a new slider.
- A set of threads and needles for sewing.
- For convenience and speeding up the process, you can use the sewing machine, if available.
- Depending on the degree and nature of the damage, you will need to purchase a new slider . You can also use the old one (but you need to fix it correctly).
- Scissors or a sharp clerical knife .
- A small flap of fabric, you can apply any material as desired.
This kit is enough to do the job of replacing the zipper. The process does not take you much time and does not require special skills in sewing.
IMPORTANT! Carefully select the size of the zipper and the type of slider. There are various options for the lock, you need to choose the one suitable for your product.
How to replace a slider
After you have prepared everything you need and freed up your workplace, you can get to work. If you have already encountered this problem, you can choose the repair option. For beginners, we suggest using a detailed description of the various replacement methods for quick and convenient restoration of integrity.
Advice! If the runner breaks, you can replace it with a paper clip. With it, you can fasten and unfasten things if necessary. This method is suitable for a temporary solution to the problem while maintaining the integrity of the main part of the lightning.
- Now we will consider the classic replacement option. If when using a standard flat dog she just flew out of the strip, you can gently put it in place from the top edge. Just insert the first links into the corresponding holes, then the slider will move down.
- If the old clip is broken, go to the store with the rest of the lightning, on which you can pick up the slider. Insert it into the product as described above. For reliability, secure the compression holes using pliers.
- When the retaining links are displaced along the edges of the zipper, the dog will repeatedly fall out. To prevent this, secure them with pliers.
- In some cases, it is necessary to alternately insert the edges of the fastener into the holes on the slider and hold it in the lower position. If you feel resistance, slightly squeeze the sides of the slider. After that, hold it to its lowest position. Squeeze the edges again with pliers, returning the product to its original form.
Important! With the help of the clamping force of the edges of the slider openings, it is possible to adjust the resistance in lightning. If the stroke is poor, loosen the clamp a little, and if it is too weak, increase it.
These replacement and restoration options can be applied to classic models without complex designs . For more complex damage using an unusual lock, you should contact the workshop, where you will be provided with quick assistance. Do-it-yourself repairs can only damage the product.
