How to hem a tablecloth

Tablecloths are very different - round, square or rectangular. They can be designed for the kitchen or for the living room, everyday or holiday.

If you like to cover tables with tablecloths, then most likely you will be interested in this article. After all, today we will tell you how to hem them with your own hands.

The edge of the product can be sewn in different ways: to hem with an open or closed cut, sewn with lace or ribbon. In any case, the cut product looks much better and will last longer.

Tablecloth corners

To work, we need:

  1. tablecloth or linen;
  2. scissors, needle, thread, pins;
  3. cardboard paper and a simple pencil;
  4. Iron and sewing machine.

First we measure the table so that the tablecloth fits the size perfectly. Take into account the fact that a few cm will go to the hem + the tablecloth should hang.

First you need to make strips 5 cm wide from thick cardboard. At least 20 cm long. This will be a pattern along which the edge of the tablecloth will be ironed.

IMPORTANT! In order to get the corners neat, you need to carefully iron the edges of the tablecloth.

Of course, it takes a lot of time, but the result is worth it.

We put cardboard on this field, bend it and iron it. Try to keep everything perfectly smooth. You can not iron the edges, and mark the needle forward with the method. It is very easy to remove after basting - you just need to pull the bundle of thread.

After that we shift the cardboard and iron again. With this review we get a heavier edge.

We iron the corners so that they do not unfold. Already at this stage, the product is much more attractive.

After ironing, pin the edges with pins. During the stitching, we will gradually remove them.

How to hem the edges of a tablecloth

After that, we go directly to the hemming of the edges.

From the wrong side, with a simple pencil, it is necessary to note where exactly the line should be. After that we sew. It is very important that the line goes evenly. If you are just learning to sew on a typewriter - do not rush . It is very important that the angles are even and perfectly match. It’s better to check all the edges several times than to tear it all apart and leave traces of the line.

After stitching, we remove all unnecessary. Do not forget to stitch pins as you work. Although even if you do not pull them out on time, nothing bad will happen, but sometimes they can get caught under the needle and it will break. This happens extremely rarely, but it is better to be safe again.

You can draw a corner with a needle or pin. So, the processing of the edge of the tablecloth came to an end. It took no more than an hour to file, but the result is worth it.

Useful Tips

  • Great life hack, how to cut evenly fabric for the product. If your flap is too large and you need to cut a smaller tablecloth, there is a great method. To do this, it is necessary to make a notch on the canvas in the right place and start pulling the thread. We pull the thread, and in its place there is a trace, on it we begin to cut. This method is only good if the material is not skewed, otherwise you can only spoil the weight.
  • To turn the corner of the product, you can use a needle or a pin.
  • You can also sew the tablecloth with lace or satin ribbon. First you need to attach the tape to the tablecloth, and after that attach it with a sewing machine.
  • If you do not know how to scribble on a typewriter, then you can process the tablecloth even easier and faster. To do this, you need to use a hot glue to glue the tape to the tablecloth.
  • If the material does not crumble, then you can not sheathe. But if the fabric is very strewed, then there is no way to do without trimming the case.
  • You can make a beautiful tablecloth from a piece of fabric or even from a curtain.
  • From the remnants of the fabric, you can sew napkins, and get an excellent set for receiving guests.

Now you can decorate the holiday table with a do-it-yourself tablecloth. Based on step-by-step instructions, this is quite simple even for a beginner needlewoman.

I wish you creative success!