Roman curtains - one of the oldest varieties of window curtains, which came to us from Ancient Rome. These curtains are used in the interiors of living rooms and bedrooms, kitchens and children's rooms. Today they produce different models of Roman curtains, the fastening mechanisms of which can differ significantly from each other.
Cornice mount
Cornice - a wooden, plastic or metal holder designed specifically for securing curtains. The following types of holders for Roman curtains exist:
- manual cornice. This is a mechanism in which the curtains are lifted by the movement of ropes or special cords. The basis of the mechanism is a drum on which a cord is wound;
- mechanical. Curtains rise thanks to the chain-rotor system;
- electronic. In this case, the curtain lift is controlled remotely.
Typically, curtain rods are sold complete with curtains. Regardless of the type of control, the cornice is fixed to the wall using self-tapping screws. If the curtain was made with your own hands, then it is attached to the usual plank or to the ledge from the old curtains.
Before mounting the cornice on the wall, marking is carried out. With the help of a ruler and chalk, an even line is drawn, which should go parallel to the windowsill. Next, holes are made in the wall with a drill. Brackets are fixed with self-tapping screws. When the cornice is installed, curtains are fastened with clips, Velcro or other types of fasteners.
REFERENCE: Curtain manufacturers usually also produce curtain rods, so you can buy a holder separately from the curtains themselves.
Bar mount
Roman curtains often come with a special mounting bracket equipped with a lifting system. The curtains are attached to the plank with adhesive tape. The bar itself can be placed on the wall or window frame using self-tapping screws. In case the curtains are small and made of lightweight materials, the brackets can be fastened with Velcro to the window frame. Heavy curtains require stronger fastening, so the bar is fixed with self-tapping screws inserted into pre-drilled holes.
REFERENCE: To wash the product, it is enough to detach it from the bar. High-quality adhesive tape should not be affected by water and powder.
Free mount
If it is not possible to install a full-fledged cornice or bar, you can use other methods:
- Hang the curtains on hinges or hooks.
- Use a homemade curtain rod and fasten the fabric on it with a stapler.
- Make a “pocket” on the curtain - hem the top edge so that a hole is formed for the holder. Then insert the holder into the curtain and place it on the wall;
- Another way to hang the curtains is to fix them on the kitchen railing. To do this, you need to make loops on the fabric.
Aesthetically free fastening is inferior to other types of fastening, however this option is the most common when fixing home-made Roman curtains or sewn to order.
How to attach Roman curtains to plastic windows?
There are mounts both in the opening itself and outside it. You can fix the curtains directly on the window sashes. The size of the installed curtain depends on the type of placement. Both mounting options are equally easy to install and should not impede the opening of the window, so the choice of fasteners depends on the design decision of the owners of the room. Before purchasing curtains, it is necessary to make all measurements in advance, otherwise you may be mistaken with the dimensions of the product.
Options for fixing outside the window opening
Curtains fixed outside the window opening in accordance with the manufacturer's instructions should not interfere with the opening and closing of windows. Fasteners included.
The width of the curtains should be 12-15 cm greater than the width of the window. If the curtains turn out to be narrower, they can introduce a feeling of poverty and stinginess into the interior of the room. Excessively wide curtains also violate the harmony of the interior, because they look bulky and pretentious. When lowering the curtain should not cover the windowsill.
Fixing options inside the window opening
To place the curtains inside the window opening, it is necessary to select a model whose dimensions will be less than the opening width by 4 cm. Anchors should be installed so that they do not interfere with the movement of the window sash. The supports are fixed on self-tapping screws or on Velcro. The curtain should be easy to raise and lower, without touching the handle and without going down to the windowsill.
Features of fixing Roman curtains on plastic windows
- 1. If you plan to close the window not only with Roman curtains, but also with long curtains, then you should place the curtains inside the opening.
- 2. It is better not to cover the wide window sills with curtains. If the window sill is narrow or scratched, it is more appropriate to cover it with long curtains.
- 3. Shutters fixed inside the opening can interfere with the opening of the shutters in the ventilation mode.
- 4. Long curtains will look ridiculous if they are placed inside the opening, so they are always attached outside it.
How are Roman curtains fastened?
Although there are many mounting options, the most reliable method is mounting on self-tapping screws. This type of fastener is durable and has a long service life. Self-tapping screws can be used to fix cornices, trims or just brackets.
If you cannot drill a wall for any reason, then there are other ways to fix the curtains. Cornices and other holders can be installed on adhesive tape or construction tape, but keep in mind that this design is not reliable. The curtain itself is easy to fix on the holder from previous curtains with a stapler or hooks.
Roman curtains are a beautiful and versatile decor element that looks good in the interiors of a variety of rooms. The installation of Roman blinds is possible for any owner, therefore, it is not necessary to contact the installation service, it is enough to follow the instructions and purchase the necessary materials in advance.
