This wonderful little thing will not only decorate and complement the look, but also serve as protection from the wind. In order to become its owner, it is not necessary to go shopping. It is enough to be able to hold a needle in your hands, and you can sew a new thing with your own hands. The subject is so simple in execution that even a novice seamstress will quickly cope with its manufacture.
What you need to sew a French scarf
In the classic version, this little thing is made of two pieces of fabric, sewn inside out to each other . That is, it does not have a wrong side .
In this case, to create it, you can use both monophonic matter and variegated coloring. By choosing two dissimilar materials for different sides, you can get a more effective accessory. He has increased variations in use.
In the process of creating any item, the starting point is the preparatory stage. In this case, it consists of the following actions.
- The choice of fabric . For such a product, lightweight, soft fabrics that are easily draped are suitable . It can be chiffon, silk, thin wool, linen, cotton and so on. It is not necessary to purchase new material. Review your wardrobe. Suddenly there are unused clothes that can be used for tailoring.
Attention! If you are using a used item, then before cutting cut it apart at the seams, wash and iron.
- Preparation of the pattern . You can build the pattern yourself or use the base sample.
- Workplace equipment with tools and necessary trifles . Of course, it is more convenient and faster to create a scarf using a sewing machine . But do not despair if it is not available. Use a sewing needle and thread . In addition, scissors should be kept at hand.
Advice ! Some models made in one tone can be decorated with original embroidery. It is best if the pattern will be located on the edge or corners of the product.
How to make a pattern
To sew any item you need a pattern. For these purposes, you can use the finished pattern, which is proposed below.
You can also create your own pattern. In order to make it clear how to do this, we will analyze the method step by step.
For the drawing you will need paper (it is better to use graph paper, but old newspapers or wallpaper remaining after the repair are also suitable), a ruler and a pencil.
Build process
- On the spread sheet, using a ruler, draw a large rectangle for the wide part.
- Then attach another elongated loop rectangle to it.
- Next, round the inner corner along the pattern.
Advice! For a good rounding line, you can use improvised objects, for example, a plate of suitable diameter.
- Carefully cut the workpiece along the contour. If you used thin paper to build a pattern, then it can be strengthened by sticking on a thicker sheet.
How to sew a French scarf
The next stage of work is the cutting of parts and sewing directly.
You can connect parts on a typewriter or manually . For the manual method, use the following seam options.
For the embodiment you will need fabric . The use for the lower layer of solid color, and for the upper motley fabric with a pattern, will look more effective. In addition, prepare threads and tools (machine or needle, scissors, chalk, pins).
Completing of the work
- Spread the prepared material with the wrong side up on a flat surface.
- Attach a pattern and outline the outline using a tailor crayon or a sharp remnant.
Advice! If you are afraid that the pattern will slip during the process, fasten it to the fabric using safety pins.
- Carefully scissor the workpiece.
- Cut the second workpiece in mirror image.
Attention! When cutting, throw a stock of 1 cm into the seam allowance.
- Next, we fold the blanks with the front side inward and chip them together with pins. If desired, you can sweep with a contrasting thread.
- Then we sew the sides, while leaving the narrowest edge open.
- We pull out the pins or remove the basting.
- At the corners, we cut the seam allowances at an angle of 45º.
- Through the unclosed edge, we turn the workpiece to the front side.
- Carefully straighten the folds and corners, and then steam it off with an iron.
- Turn inside the open edge and sew.
- Next, we form a loop. To do this, turn the narrow side four centimeters and sew.
The elegant scarf is ready to use.
Tie such an accessory is not difficult. It is enough to stretch any edge through the loop and smooth the folds nicely. By adjusting the degree of fabric tightening, you will receive various wearing options: from a woman’s tie to a flirty bow.
