A tool bag is a must for any person involved in repair work. And this is just a very convenient way of storing everything that usually lies separately. Such a bag is necessary for installers, locksmiths, motorists and even needlewomen. You can do it yourself, making a pattern depending on the number and nature of the tools. For example, for sharp, you need a hard cover so that the fabric is not cut through. But before that you need to decide: whether it will be a folding canvas, for a belt or on a belt. The best option is a waist bag: it is spacious, does not take hands during operation and it can easily be turned behind your back so as not to interfere.
What you need to make a tool belt
A homemade tool bag should be comfortable, roomy and suitable for the type of work performed. The first thing to decide is materials. The fabric may be ordinary, but then thick paper needs to be sewn in order for the product to hold its shape. In addition, the durability of the fabric should be taken into account - it will be unpleasant if the do-it-yourself thing quickly breaks.
Advice! It is recommended to use nylon or leather - it is a dense, strong material that has great resistance to tearing or pollution.
Materials for sewing bags are of three different types: leather, leatherette and nylon. In rare cases, canvas is used, but on condition that the tools are not sharp or protected by covers.
The most affordable and versatile material is leatherette. However, the skin will be much stronger and easier to find. For a waist bag, you can alter an old briefcase or a women's handbag - as a more suitable option than creating your own pattern.
Nylon is also affordable and versatile, has a lower cost and is therefore used much more often. Nylon bags are lightweight and do not require special care. They are easier to wash and clean than leather, which is especially true if there is work with oils or other lubricants.
Another option is cloth-based oilcloth. It is also dense, inexpensive and from it you can quickly sew a product without any special costs. The cheapest option at cost, you can also practice if there is no experience. But if you count on durability, it is better to use the skin.
Important! Leather is the best choice for tailoring a durable tool bag.
The second thing you need: tools. The following set will be required:
- thick needle;
- strong threads;
- scissors for cutting out patterns;
- chalk or soap for marking lines on the pattern;
- sewing machine.
As well as selected fabric, zippers and metal rivets.
First, a pattern is cut out, after which all parts are sewn together, forming a finished product. If everything is done correctly, that, most likely, the bag will last a long time.
How to make a tool bag on your belt with your own hands
Pattern for the lightest model: just two or three rectangles sewn together. Separate pockets for small parts are also taken into account.
Important! You should think in advance about the location of departments, the number of pockets, the type of fastener, etc. details.
Sewing process:
- Cut the pattern, leaving enough allowances for the seams.
- Sew cut pieces to strengthen edges. To do this, you can use a fabric tape or flash it with twine with an overlap.
- Sew a fabric belt wide and long enough to tie around the waist.
- Mark on the main apron two pockets, jigsaw clipping pins.
- Inspect and try on the assembled parts, checking for convenience in order to get tools.
- Sew pockets.
The main thing you need to rely on is the volume of the product. But you can not hammer it to the brim, otherwise the fabric will tear. Tools will pull it down, pulling the belt. The second is the functionality of all departments. It is important that they fasten, so that small parts do not fall out, or remain open if necessary in order to get tools. You also need to choose a material color so that dirt is not visible.
Tool Bag Recommendations
The main recommendation is to choose a non-marking, soft material so that even sharp objects can easily be put into it. The absence of pollution is especially relevant if the main purpose of use is in repair or construction work.
In addition to the belt, it is recommended to equip the loop tabs for the belt. In them you can hold a regular trouser belt so that it is convenient to hang a bag on a belt if long waist tails are not too comfortable. So it will take a compact form when suspended, but remain roomy.
A tool bag is simple enough to make, given the strength of the material and using all the tools.
