Glasses, like many other things, require their place, but it is very important to keep them safe when carrying. Just in the bag, they can even break. The article has a special offer - it is to make beautiful eyeglass cases for them for leather. To work, you need a small piece of skin, and the result is simply amazing.
How to make a case (case) for leather glasses?
In fact, sewing is not so difficult, and even sewing a case (cases) for glasses made of such rough material as leather. If you properly equip your workplace and have such tools at hand, a light female hand can create for yourself a couple of unusual and very elegant cases for your favorite glasses.
What materials are needed?
The most important material for such products is leather. But the use of leather substitute is not ruled out. It is worth taking a look at such pleasant trifles as accessories for handbags here you will also need it.
Eyeglass case "owl"
Oh, these fashion trends. Everyone wants to get unique handmade leather models. And this is great, because it simply cannot be more unique than this product. Nice work, and also very useful. There is no danger for them with glasses.
To work, use:
- brown skin;
- crayon;
- scissors;
- needles and threads;
- soldering iron;
- hole punch or awl;
- lightning brown (short);
- acrylic paints (small sponge).
Pattern
Draw a rectangle on the skin to the size of the glasses. Separately, cut the part for the head of the bird.
Training
Cut a rectangle, and draw a thin line at a distance of 0.5 cm, mark points on it every 0.5 cm. Then make holes using a hole punch or a special tool.
Lightning compound. Sew a zipper between the sides, and slightly bend the corners to get a convex shape of the bag. Flash the product a second time.
Burning
In order to get the body of an owl, you must first make a drawing, then heat the awl and carefully draw a line. You can use a special thin soldering iron.
Treat the edges of the part for the bird’s head with a soldering iron so that the skin is slightly rounded. After burning, apply acrylic paints with a small gradient with a sponge . So a beautiful bird is ready.
Geometric Glasses Case
A simple model with an unusual design approach. Very light colors for the product and the cutting of geometric shapes on the canvas are also welcome.
To work, use:
- skin light color;
- hole puncher;
- threads and needles;
- scissors.
Pattern
Make a neat pattern in size.
Edge Processing
To process the edge of the product, it will be necessary to draw a line 0.2-0.3 cm from the edge of the pattern. Next, put points at a distance of 0.5 cm from each other exactly along the line. Then a hole punch is taken for work, which in front of the seam will make even holes for the thread.
Stitches
Connect the part to get a pocket and can be sewn. It will not be difficult to do this, especially after processing with a hole punch or an awl. For work, it will be possible to use a simple seam “forward needle”, then flash it again so that all the intervals between the holes are filled. So the seam will turn out to be almost factory-made, and the work will be reliably fixed.
Clasp
It remains only to install the clasp. The edges of the skin can be treated with a lighter. For the fastener use a long strip, which is connected to the back wall of the eyeglass case.
In order to somehow decorate this model, you can use special clippings. This is a cut on the front wall of geometric figures. Pre-draw them with chalk . But do not cut the line to the end so that the figures do not fall out and form holes in the canvas.
Eyeglass case with applique
Covers with a variety of patterns, ornament or applique look creative.
To work, use:
- brown skin;
- crayon;
- scissors;
- needles and threads;
- hole punch or awl;
- lightning brown (short);
- application of multi-colored strasses (or thermal sticker) in the shape of an owl.
Pattern
Draw a circle on the skin with a diameter of +5 cm.
Training
Cut a circle and draw a thin line at a distance of 0.5 cm, mark points on it every 0.5 cm. Then make holes with a hole punch.
Lightning compound. Sew a zipper between the sides and slightly bend the corners to get a convex shape of the bag. Flash the product a second time.
Decoration
Decorate the work with an owl: with thermal sticker or stick an application of rhinestones . If desired, you can buy separately rhinestones, and collect your unusual picture of an owl.
These three models of the case for glasses will definitely decorate the glasses and will be reliable protectors for them . For each of the models, the master spent about 1 hour. It’s not so difficult to sew such beautiful things, so why not please yourself with another fashion accessory and definitely unique.
