Can shoes be repainted in a different color?

If your beloved pair of shoes eventually lost a presentable look, do not rush to get rid of it. You can give old shoes a new life with paint. Or you can get a whole new pair, giving the product a different shade. After all, modern fashion is very democratic, all bright colors and prints are in trend.

Is it possible to repaint shoes in a different color at home?

If there is a need to return the old shoes to their former bright and saturated shade or completely change the original color, it is not necessary to contact professionals for this.

This process can be carried out independently at home. This is a completely simple and inexpensive way to give a new life to old shoes.

It is only necessary to observe a certain sequence of actions and adhere to the recommendations below.

Recommendations for different types of shoes

To color shoes, you must prepare them accordingly . Leather, nubuck, rubber, suede and fabric products are prepared for painting in different ways.

Leather

Leather shoes must be carefully prepared for this kind of procedure. To do this, you need:

To clean shoes from dirt and dust, because of which the paint will not be able to firmly adhere to the surface of the product. It is necessary not only to wash the products with soap and water, but also carefully remove the remnants of the cream.
You can apply for cleaning special compounds (Tarrago Color Dye Kit, Saphir Renomat or Saphir Decapant), which are sometimes sold complete with the appropriate paint, but sometimes separately.
If the products have abrasions and scratches, they must be coated with a special compound, wait for it to dry completely, and only then proceed to the next stage. This is necessary because the paint will not cover such flaws, it can only slightly fill them.

For staining, it is recommended to use professional products that have already proven themselves well. Similar formulations include: Tarrago Color Dye Kit, Saphir Dye Teinture Francaise, and Tarrago Quick Color.

Important! Coloring of such products should be carried out in a well-ventilated area, since the paint has a rather pungent odor.

The process of painting shoes made of leather:

The floor should be covered with unnecessary newspapers and shoes placed on them .
The paint must be rubbed in a circular motion with an even layer on the surface of the product. It is better to use a sponge for applying paint. Maximum attention should be paid to the seams.
After the surface is completely painted, you need to leave the product to dry for about 15 hours. It is necessary to apply a water-repellent agent to the material.

Nubuck and suede

The preparatory process consists of the following steps:

Using a special brush, it is necessary to remove dust and dirt from the surface of the products, which significantly interfere with adhesion.
Then you need to carefully remove the remnants of cream and silicone containing impregnations. To do this, it is recommended to use a hard brush and laundry soap.
After that, the surface of the products should be cleaned with a special tool, which is included in the kit for staining.

After the products are completely dry, you can begin to stain . The best means for coloring models of nubuck and suede are: Prestige Rinnovatore, Platinum, Silver and MIDA.

Advice! When painting nubuck products, do not spray paint too close to the surface. In this case, the color may turn out to be unnatural.

To repaint white shoes in a different color:

Wear protective gloves and a respirator and shake well before use with a spray can of paint.
The floor should be covered with unnecessary newspapers and put products on them. Then spray paint onto the surface with an even thin layer, holding the spray can at a distance of 20 cm from the shoe. If a liquid mixture is used, it is necessary to apply the product with a soft finely porous sponge in circular motions.
It is necessary to carefully study all the seams, avoiding the missed areas.

After this product must be left for a day in a well-ventilated area so that the paint can fully absorb into the material.

Fabric shoes

Before dyeing a fabric product, it is necessary to clean it as thoroughly as possible . Since such models are not afraid of soap and water, they can be soaked in a bucket of dishwashing liquid diluted in water and rubbed off with a hard brush . Soak carefully so as not to damage the adhesive.

To whiten the sole, you can use repeatedly tested folk remedies: hydrogen peroxide, ammonia, mustard, toothpaste and an old toothbrush.

You can wash these shoes in the washing machine . Sneakers should be washed at a temperature not exceeding 40 degrees. In this case, you need to turn off the spin and turn on the extra rinse.

It is better to paint such products with acrylic paint.

Staining process:

It is necessary to remove the laces and grease the sole of the sneakers with a thick layer of petroleum jelly.
Acrylic paint must be diluted with water according to the instructions. To paint well absorbed into the fabric, you need to put on gloves to add salt to it.
Sneakers should be taken by the sole, and dip the fabric part in the prepared solution. If desired, you can also paint with a brush, dipping it into the solution.
Painted products must be left to dry completely, after which a second coat of paint can be applied if necessary.
After drying, the rest of the petroleum jelly should be removed from the sole with soda or dishwashing detergent .

Rubber

To prepare such shoes for staining, you must perform the following steps:

Wash products thoroughly . Rubber models can be washed with shampoo, dishwashing detergent and other similar products.
After complete drying, the shoes must be degreased with ammonia or medical alcohol.

Important! Nail polish remover is not suitable for this purpose, because acetone corrodes the paint.

To stain such shoes, you can use acrylic paint, enamel paint or another option suitable for rubber. Refresh rubber shoes completely at home will fail.

To solve the problem, you can apply decoration . It is necessary to purchase stencils with any patterns in the store and use them to mask scuffs and damage . Such shoes will dry after staining, usually 2-3 days.